QFHK-8: The Quick Fit Hose Kit
The concept behind this accessory was that a homeowner who has spent a lot of money on kitchen or bathroom cabinets just doesn’t want an installer cutting them up more than is necessary. The Quick Fit Hose Kit provides a means of installing any Quiet-One kickspace heater without having to cut out an access panel in the bottom of the cabinet; it makes Quiet-One kickspace units easier to install as all solder work can be done and all tube connections can be made before the installer slides the Quiet-One into its final resting place under the cabinet; and imagine that, in the unlikely event that service is required, the installer can now pull the kickspace out into the middle of the floor rather than climb into the cabinet.
Each fully packaged kit includes:
- 8’ of 1/2″ Watts Radiant ONIX synthetic hose with DIN standard oxygen barrier
- four 3/8” barb x 1/2″ sweat
- two 1/2″ copper elbows
- two 1/2″ copper couplings
- four 3/8″ self tite clamps
OLG: Kickspace Grilles
Several overlay grilles and replacement grilles are available to enable the contractor’s customer to readily match the decor of their house. All kickspace heater models have grilles available in brown, white, chrome, stainless steel and gold (while supplies last). If other colors are required, the white grille can be painted on site to match any decorator’s taste.
| MODEL | DESCRIPTION | FITS THIS KICKSPACE |
| OLG1-B | Brown Overlay | KS2004 |
| OLG1-W | White Overlay | KS2004 |
| OLG1-C | Chrome Overlay | KS2004 |
| OLG1-G | Gold Overlay | KS2004 |
| OLG1-SS | Stainless Steel Overlay | KS2004 |
| OLG3-B | Brown Replacement | KS2006, KS2008 |
| OLG3-W | White Replacement | KS2006, KS2008 |
| OLG3-C | Chrome Replacement | KS2006, KS2008 |
| OLG3-G | Gold Replacement | KS2006, KS2008 |
| OLG3-SS | Stainless Steel Replacement | KS2006, KS2008 |
| OLG4-B | Brown Replacement | KS2010 |
| OLG4-W | White Replacement | KS2010 |
| OLG4-C | Chrome Replacement | KS2010 |
| OLG4-G | Gold Replacement | KS2010 |
| OLG4-SS | Stainless Steel Replacement | KS2010 |
KT35: Aquastat
The kit is packaged complete with the aquastat, two wires with stripped ends, two wire nuts, and instructions.